+91 22 2446 5778

10 Bit MINI Absolute Analogue Encoder, MINI NCP, VE-Voltage Encoder

The new product in PANKAJ Basket, Model VE-360 to provide Solid state analogue output on panel
mounting manually actuation using contactless Hall’s effect technology. Burg pin connector’s makes termination connection easy.

The product is also available, pre programmed with effective rotational angle of 450, 900, 1800 and 3600 in CW and CCW.


  • 25 mm Ø, 12 mm height Moulded housing
  • 3/8″ x 32 TPI, 10mm long Brass Nickle Plated Bush
  • 6.35 mm Ø, 15 mm long Brass Nickel plated Shaft


Angle of Rotation 0~3600 Clockwise rotation (Endless), can be factory programmed for 180°,90°, 45° and Counter Clockwise rotation
Auxiliary Supply (Vss) 5VDC±10%, 25mA max
Output 0-Vss, Ratio metric with supply (Load ≥ 2KΩ)
Total Independent linearity ±0.70 (with respect to best line fit and over full temperature range)
Resolution 10 bit (0.350) over 3600 for 3600 range,
10 bit (0.1750) over 1800 for 1800 range,
10 bit (0.0880) over 900 for 900 range,
10 bit (0.0880) over 450 for 450 range
External Magnetic Field Effect Negligible effect due to Differential Measuring technique &
sensor conditioning circuitry. (It is desirable to mount encoder
away from strong magnetic field, at least 100mm
Maximum Angular Shaft Speed 100RPM. Number of samples per revolution decreases as the speed
of rotation increases. Accuracy of output is not affected by Speed
Operating Temperature Range 00~700C
Temperature Compensation No external compensation required
Insulation Resistance 2000MΩ min. @ 500VDC
H.V. Test No damage for 1 min at 250VAC
Protection with 100mA fast blow fuse in series with supply a. Reverse polarity protection,
b. Maximum auxiliary supply up to 35VDC,
c. voltage output short circuit protected to ground rail
Rotational life 1 million
Protection Class IP-40
Fixing Method 3/8” x 32 TPI ME bush
Size Refer Drawing
Casing Material Reinforced Polyamide
Shaft Material Nickel Plated Brass
Weight 22gm

Functional Description

Contactless measurement technique gives output in ratio metric with supply voltage. Output voltage is
taken out through berge pin connection as marked on housing or wires can be directly soldered on
gold plated output PCB terminals.

Sample Rates

Sampling Rate, n = 60/(RPM x 384μs).
e.g. RPM = 60, then n = 60/(60 x 384 x 10-6) = 2604 samples/second.




  • Automation,
  • Test and Measuring Instruments
  • Robotics,
  • Crane, Angle Measurement & many more

Ordering Information Example: VE-90

Model No. Angle of Rotation
VE 0°/360°, 45°, 90°, 180°

Note: We reserve the right to make any kind of design, specifications or functional modification at any moment without prior notice

Enquiry Form

Your Name (required)

Your Email (required)

Your Message

Secrete Code